Baby Transport Incubator Standard

Product Description

ControlPanel : Thecontrol panel features a display which is easy reading at any angle duringtransportation. Display for air temperature and skin temperature helps tomaintain, control and provide essential information about the infants thermalsupport. Microprocessor controlled system has air and skin modes for operation.Display shows both temperatures. Air or Skin temp along with Set temp. Softtouch operation comes with digital display and extensive alarms.

PowerSource : BabyTransport incubator  operates on AC or DC power using AC when available orswitching to its internal battery when necessary

Battery: Thebatteries used in the system are 12 volt 18ah. Sealed maintenance free VRLAbatteries.

TheCharge Time is 8-10 hrs. per battery from full discharge.

Singlewall  Head Hood

ChassisBody : Plastic (fibre) for shock proof the system

Alarms

Skin temp  low / high  Probe failure    Low battery Power failure System Failure  Timer

Incase of high temperature. above 38 degree C, heater automatically cuts off to ensurebabys safety. 

BabyTransport Incubator can be used on manual mode as well. 

StandardFeatures

Single wall Hood Skin temperature probe / Air temp. Probe 2 accessdoors    1 baby belt Collapsible trolley 

Features 

Itcomes with Oxygen Cylinder, Pressure Regulatory Assembly, Flow Meter.

CollapsibleStainless Steel Stand

With2/4 no. gas springs for ambulance and in hospital transport purposes. Gasspring system allow the stand to collapse when the lever is pulled and trolleyis pressed from both the sides.

ControlDisplays

Batterycondition status : single led indication of low battery condition on the sidepanel

Powermode : illuminates AC, DC or external DC 

Air/Babytemp C  : displays incubator air temp / baby temperature

Temperatureset range  : 32 degree C -  39 degree C

Tempvariability  : 1.0 degree C

Tempuniformity  : 1.0 degree C

Airfilter : removes airborne particles & dust

Easy Access : Quick and easy access through the side access door and front portholes. The side door folds down and the matteress retracts out  from thehood to access for  emergency procedures. The door and tubing ports offer ventilator tubing support .

Infantrestraint strap is attached to the baby bed.

Dimensionsin inches (Approx)

Heightwithout hood  : 98cm 

Incollapsible stand mode  : 72cm 

Hood : 122cm Width  : 57cm Length  : 132cm

Babybed  : 50 x 27cm

Weight : 75kg 

Backup : 60-90mns 

Sizeof Castors  : 12.5cm PU

Sealedmaintenance free battery  : VRLA Batteries Charge time : 10hrs.(Approx.)