ConXport . Dissolution Six Test Apparatus

Product Description

ProductDescription

The apparatus consists of 4 parts. Awater bath with 500 watt heater covered 1000 ml. vessel made from Borosil glassand digital temperature control. Variable speed motor, with 30cms longsstainless steel shaft. A cylindrical stainless steel basket and a membranefixing attachment, water bath is made of imported thick Acrylic sheet withtransparent cover at top. Temperature of the bath is maintained at 37ºC with anaccuracy of ±1º C.A cylindrical glass vessel of 1000 ml. capacity with slightlyconcave bottom has a flanged edge at the top to accept a fitted cover havingfour holes. One hole placed in the centre. The shaft of the motor is fitted onan upright and has an electronic speed regulating device that allows the speedto be varied from 25 to 250 R.P.M. The shaft is 6 mm dia. 30 cms on with basketfitted at end rotates smoothly and without any significant wobble. The basketconsists of two parts one of which is attached to the shaft. It is of solidmetal except for 2 mm vent and is screwed on the main shaft. Lower part of thebasket is held with this part by means of threading and this allows properremoval of lower part for introduction of the test samples. The detachable partof the basket is fabricated of stainless steel mesh formed into cylinder ofsize 36 mm x 25 mm dia. The equipment is workable on 220 volts 50 C/S A.C. butAnalog type single, Double, Three, Six & Eight stage.